Is AWS Elastic Beanstalk down?
Current AWS Elastic Beanstalk status is UP

We checked the official AWS Elastic Beanstalk Status Page 3 min. 41 sec. ago. Learn more
Having a problem? Help Allie Gator keep this page accurate!

Report an Issue

Stay informed of future downtime with dashboards and notifications

Recent AWS Elastic Beanstalk Outages and Issues

Follow the recent outages and downtime for AWS Elastic Beanstalk in the table below.

Start Time

Type

Length

Message

Details

September 19, 2023 05:25 UTC

WARN

ongoing

Network Connectivity Issues

See more
Start Time

September 19, 2023 05:25 UTC

Type WARN
Affected Components

Oregon - AWS Elastic Beanstalk

Oregon - AWS Batch

Message

Network Connectivity Issues

Details

We continue to work towards resolving the increased networking latencies and errors affecting Availability Zones (usw2-az1 and usw2-az2) in the US-WEST-2 Region. We have now seen network mapping propagation latencies return to normal levels in both usw2-az1 and usw2-az2 Availability Zones. At this stage, all EC2 instance launches and network configuration changes are operating normally. We’re continuing to monitor network mapping latencies and will provide a final update once all has been confirmed to be operating normally.

September 18, 2023 21:40 UTC

WARN

about 8 hours

Network Connectivity Issues

See more
Start Time

September 18, 2023 21:40 UTC

Type WARN
Affected Components

Oregon - AWS CodeBuild

Oregon - AWS Elastic Beanstalk

Oregon - Amazon Managed Streaming for Apache Kafka

Message

Network Connectivity Issues

Details

We continue to make progress towards resolving the increased networking latencies and errors affecting Availability Zones (usw2-az1 and usw2-az2) in the US-WEST-2 Region. While we continue to make progress in addressing the issue, we wanted to provide some more details on the issue. Within Amazon Virtual Private Cloud (VPC) any changes to the network configuration - including launching an EC2 instance, attaching an Elastic IP address or Elastic Network Interface - needs to be propagated to the underlying hardware to ensure that network packets can flow between source and destination. We call this network configuration “network mappings”, as it contains information about network paths or mappings. Starting at 10:00 AM PDT this morning, we have been experiencing a delay in the propagation of these mappings within a single cell (part of the Availability Zone) in usw2-az1 and usw2-az2 Availability Zones. The root cause appears to be increased load to the subsystem responsible for the handling of these network mappings. We have been working to reduce the load on this service to improve propagation times, but while we have made some progress, mapping propagation latencies have not returned to normal levels. We continue to work to identify all forms of resource contention that could be leading to load, and have a few additional updates that we are currently working on.

Once we have reduced the load on the subsystem responsible for network mapping propagation, we would expect full recovery. Since the issue only affects networking mappings as a result of changes to the network configuration, avoiding any mutating changes to your network configuration in the affected Availability Zone would limit impact.

For customers looking to fail away from the affected Availability Zone or Region, please ensure that you are not relying on mutating network configuration in the affected Availability Zones as part of that process.

We will continue to keep you updated as we make progress towards full recovery.

October 12, 2022 19:50 UTC

WARN

about 1 hour

Increased latency for UpdateEnvironment API calls

See more
Start Time

October 12, 2022 19:50 UTC

Type WARN
Affected Components

N. Virginia - AWS Elastic Beanstalk

Message

Increased latency for UpdateEnvironment API calls

Details

We are investigating increased latency for UpdateEnvironment API calls. This issue impacts both the API, and requests made through the Management Console. Additionally, attempts to abort the update (via the AbortEnvironmentUpdate API) may return 5XX errors. We are actively working on identifying the root cause and will provide additional information as soon as possible.

December 22, 2021 07:35 UTC

WARN

about 4 hours

Console Application Upload Errors

See more
Start Time

December 22, 2021 07:35 UTC

Type WARN
Affected Components

N. Virginia - AWS Elastic Beanstalk

Message

Console Application Upload Errors

Details

11:33 PM PST We are investigating an issue where customers are unable to upload and deploy new application versions through the Elastic Beanstalk console in multiple Regions. Customers who need to update or deploy a new application version should do so using the AWS CLI. Existing applications are not impacted by this issue

November 24, 2019 11:45 UTC

WARN

about 2 hours

Increased API Error Rates

See more
Start Time

November 24, 2019 11:45 UTC

Type WARN
Affected Components

N. Virginia - AWS Elastic Beanstalk

Message

Increased API Error Rates

Details

4:07 AM PST Between 1:20 AM and 3:50 AM PST, we experienced increased error rates for the Elastic Beanstalk Health APIs in the US-EAST-1 Region. The issue has been resolved and the service is operating normally.

No outages or status changes in the last 24 hours

AWS Elastic Beanstalk status, last 24 hours:

5:00 PM
11:00 PM
5:00 AM
11:00 AM
5:00 PM
5:00 PM
5:00 AM
5:00 PM
  • Up: 24 hours

  • Warn: 0 minutes

  • Down: 0 minutes

AWS Elastic Beanstalk Outage and Status History

We've been monitoring AWS Elastic Beanstalk outages since March 8, 2015.
Here's the history of service outages we've observed from the AWS Elastic Beanstalk Status Page:

June 2024

May 2024

April 2024

  • Up

  • Warn

  • Down

Instant enriched data from
3,960 status pages

About Our AWS Elastic Beanstalk Status Page Integration

AWS Elastic Beanstalk is a Cloud Infrastructure solution that StatusGator has been monitoring since March 2015. Over the past over 9 years, we have collected data on on more than 1,663 outages that affected AWS Elastic Beanstalk users. When AWS Elastic Beanstalk publishes downtime on their status page, they do so across 4,881 components and 31 groups using 3 different statuses: up, warn, and down which we use to provide granular uptime metrics and notifications.

More than 3,900 StatusGator users monitor AWS Elastic Beanstalk to get notified when it's down or has an outage. This makes it one of the most popular cloud infrastructure services monitored on our platform. We've sent more than 767,300 notifications to our users about AWS Elastic Beanstalk incidents, providing transparency and peace of mind. You can get alerts by signing up for a free StatusGator account.

If AWS Elastic Beanstalk is having system outages or experiencing other critical issues, red down notifications appear on the status page. In most cases, it means that core functions are not working properly, or there is some other serious customer-impacting event underway.

Warn notifications are used when AWS Elastic Beanstalk is undergoing a non-critical issue like minor service issues, performance degradation, non-core bugs, capacity issues, or problems affecting a small number of users.

AWS Elastic Beanstalk does not post separate notifications for planned maintenance work so we are unable to send notifications when maintenance windows begin. If you need AWS Elastic Beanstalk maintenance notifications, please email us.

AWS Elastic Beanstalk does not publish a feed of proactive maintenance events on their status page at this time. If they do, be sure to let us know and we'll aggregate AWS Elastic Beanstalk maintenance events into your unified calendar.

When AWS Elastic Beanstalk posts issues on their status page, we collect the main headline message and include that brief information or overview in notifications to StatusGator subscribers.

When AWS Elastic Beanstalk has outages or other service-impacting events on their status page, we pull down the detailed informational updates and include them in notifications. These messages often include the current details about how the problem is being mitigated, or when the next update will occur.

Because AWS Elastic Beanstalk has several components, each with their individual statuses, StatusGator can differentiate the status of each component in our notifications to you. This means, you can filter your status page notifications based on the services, regions, or components you utilize. This is an essential feature for complex services with many components or services spread out across many regions.

Frequently Asked Questions

Can’t find your question? Email us to arrange a time to discuss. We’d love to chat!

AWS Elastic Beanstalk Down?

Are you experiencing issues with AWS Elastic Beanstalk? Sign up to receive notifications when AWS Elastic Beanstalk publishes outages.

AWS Elastic Beanstalk Down or not working? Never be taken by surprise again.

StatusGator tells you when your cloud services have problems or their statuses change. We monitor the official status pages of more than 3,960 cloud services in real-time, aggregate the data, and send you alerts via email, Slack, Teams, SMS, and more.

Looking for recent downtime and outages of AWS Elastic Beanstalk?

Sign up for StatusGator and see all historical information about AWS Elastic Beanstalk outages and performance issues. Get free, instant notifications when AWS Elastic Beanstalk goes down.